What should be paid attention to when processing stainless steel hollow spheres?
processing area: the processing area of stainless steel hollow spheres should be relatively fixed. The platform of stainless steel hollow sphere processing area should take isolation measures, such as laying rubber pads, etc. The fixed management and civilized production of stainless steel hollow sphere processing area should be strengthened to avoid damage and pollution to stainless steel parts. Blanking: the blanking of stainless steel parts adopts shearing or plasma cutting, sawing, etc. Shearing: When shearing, it should be isolated from the feeding bracket, and the Hopper should also be covered with rubber pads to avoid scratches. Plasma cutting: After plasma cutting, the cutting slag should be cleaned up. During batch cutting, the finished parts should be cleaned up in time to avoid the contamination of the workpiece by the cutting slag.
sawing and blanking: when sawing and blanking, the clamping shall be protected by rubber, and the oil stain and residue on the workpiece shall be cleaned after sawing. Mechanical processing: stainless steel hollow spheres should also be protected during mechanical processing such as turning and milling. After the operation, the oil stains, iron filings and other sundries on the surface of the workpiece should be cleaned. Forming process: in the process of bending and bending, effective measures should be taken to avoid scratches and creases on the surface of stainless steel parts. Rivet welding: When stainless steel parts are assembled, forced assembly should be avoided, especially flame baking and assembly. If plasma cutting is used temporarily in the Assembly or manufacturing process, isolation measures shall be taken to avoid pollution of other stainless steel parts caused by cutting slag. After cutting, the cutting slag on the workpiece should be cleaned up.
welding: stainless steel parts must be carefully removed from oil, rust, dust and other debris before welding. Argon arc welding should be used as far as possible during welding, and small current and fast welding should be used during manual arc welding to avoid swinging. Arc ignition is strictly prohibited in non-welded areas. The ground wire is properly located and firmly connected to avoid arc scratch. Anti-splash measures should be taken during welding (Such as brushing white ash, etc). Apply stainless steel after welding (Do not use carbon steel)The flat shovel thoroughly cleans the slag and splash. Multi-layer welding: during multi-layer welding, the interlayer slag must be removed. During multi-layer welding, the interlayer temperature shall be controlled, generally not exceeding 60℃.
Weld: the weld joint shall be ground, and the weld surface shall not have defects such as slag, air holes, undercut, splash, crack, incomplete fusion, incomplete penetration, etc, weld and base metal should be smooth transition, not lower than the base metal. Orthopedic: for orthopedic stainless steel hollow spheres, flame heating should be avoided, especially repeated heating of the same area is not allowed. When orthopedic, try to use mechanical devices, or use wooden hammers (Rubber hammer) Or pad rubber pad hammering, it is forbidden to hammer with a hammer to avoid damage to stainless steel parts. Handling: When the stainless steel hollow ball is transported during processing, the transportation tool (Such as a car, battery car or Crown block, etc) And should be clean and have isolation protection measures to prevent dust, oil and rust from polluting stainless steel. It is strictly prohibited to drag directly on the platform or the ground, and it is strictly prohibited to bump and scratch.
When you find yourself in need of steel balls suppliers hollow steel spheres supply, you may not know where to begin. And that's OK! Search out Foshan Dongyuan limited to handle your hollow steel balls for sale needs.
Foshan Dongyuan limited seeks to lead the industry by instilling pride in our customers, creating value for the market and sharing responsibility around the world.
Foshan Dongyuan limited clearly knows that people often launch something and love it and want to go on and on about it, but that's too normal and mediocre. There are lots of other competing products, so we need to keep it very, very unique.
Foshan Dongyuan limited deems that we can drive consumer transactions using high-tech tools like artificial intelligence and cognitive data sets.