The Suitable Ball Mill is The Best Ball Mill
Ball mill is the key milling equipment after material has been crushed. It is widely used in cement, silicate, new construction material, refractory material, chemical fertilizer, ferrous metal and non-ferrous metal as well as ceramics. It is widely applied to dry or wet grinding for ores and grindable materials.
Ball mill is formed by feeding part, discharging part, rotation part and driving part (gear box, small transmission gearwheel, motor and electric control). The central hollow shaft is cast steel, the inner liner can be changed, the rotation big gearwheel is made by cast hobbling processing, and there are wearable liners with favorable anti-wear ability. Reliable and stable are the main advantage of this equipment.
How to reasonably grasp the grinding fineness is the key element to reduce the beneficiation costs and increase the economic benefits of mineral. Grinding fineness is one of the factors that affect mineral indicators. The volume of materials grinding fineness directly affects the level of fine ore and the
recovery of products.
The operation technology of ball mill is very important. The volume of grinding material and the debugging of sieve screen grid is the key. The grinding system must be supervised by ball mill. In production, if the volume of feeding material has changed their appearance, the material must be sent back to the crushing plant.
Generally speaking, the finer grinding granularity is helpful to that the useful minerals can get fully separation with waste rock and also is useful for increasing the recovery of metals. So the grinding fineness should be increased as much as possible. Another side, grinding is the first part of the beneficiation process. So, in order to ensure stable production, the grinding process should be steady as much as possible.
The volume of water at the port of discharge will affect the grinding fineness directly. In China, most of mining equipment can not be achieved semi-automatic grinding, for the volume of water is adjusted manually by workers. So the workers must look the water situation and debug the ball mill prudentially.
I hope this article is useful for you~
Cement production line : http://www.crusher-export.com/cement_line.htm
Sand maker : http://www.best-crushers.com/sandmaker.htm