Stainless Steel Hollow Ball:
Manufacturing Procedure:
Step 1: Selection of Size and Preparation
High quality stainless steel is applied in the construction procedure, where we usually use standard AISI/SS 304 Stainless Steel due to its comparatively high cost-effectiveness and practicability among 201 and 316.
After the preparatory process, stainless steel sheet will be cut, bent and shaped into a preliminary "sphere".
Step 2: Polishing
This "sphere" is not spherical though. It is however angular which has to be rounded first after a serial of compulsory procedures.
Step 3: Refining
By using several tools and materials, the surface of the sculpture is mirror-polished to flawlessness.
Step 4: Packing
Specifically-tailored wooden box will keep the sculpture safe and intact during transport.
Specification:
1. Material: Stainless steel 201,304,316
2. Diameter: 6mm -2000mmn
3. Corrosion resistance: 316>304>201
4. Feature: Anti-corrosion; no magnetic, corrosion resistance
5. Application: Mainly used for garden decoration, indoor/outdoor decoration
6. Finish: polished, brushed, matt, sandblasted, painted or plated.
CS MODEL |
201 |
304 |
316 |
C |
0.15% max |
0.08% max |
0.08% max |
Si |
1.00% max |
1.00% max |
1.00% max |
Mn |
5.50-7.50% |
2.00% max |
2.00% max |
P |
0.045% max |
0.045% max |
0.045% max |
S |
0.03% max |
0.030% max |
0.03% max |
Cr |
16.00-18.00% |
17.00- 19.00% |
16.00-18.00% |
Molybdenum |
----- |
----- |
2.00-3.00% |
Ni |
3.50-5.50% |
8.00 --10.00% |
10.00-14.00% |
N |
----- |
----- |
0.10% max |
Nitrogen |
0.25% max |
----- |
----- |
Instruction:
Stainless steel products are supposed to be maintained regularly. To keep them as new as always, they could be cleaned with soft detergents and water. Stainless steel items shall be preserved or displayed in dry environment from salty and humid coastal areas.
To keep stainless steel items clean on the surface, we should not them directly with our hands. By following these instructions, there will no oil or fingerprints on the surface that might do any harm.
To minimize scratch, they shall be handled with care and caution. Keep sharp and pointed-edged items away from these products. A bright clean finish can be prolonged by rubbing with microcrystal wax after cleaning off.