Stainless Steel Water Features Garden Waterfall
Stainless Steel Water Features Garden Waterfall
Factory Outlet
Situated in Chaoshan, Guangdong, our factory totals 300m3 and is outfitted with 30 professionals. Highlighted by exquisite and superior craftsmanship, our factory is capable to satisfy strict customer requirements.
To every customer, we show respect and patience. By supplying a full line of products, we have sucessfully and gratefully customized or mass produced a diversity of products.
Product Profile
Stainless Steel Ball
Material: SUS304/316 Stainless Steel
Diameter: 1000mm
Thickness: 0.8mm-2.0mm
Applied Technology: Cutting, welding and polishing
Tools: welding guns and polishing machines
Package: Customized wooden case, EPE and cushion on the bottom(depending on means of transport)
Transport: Air, Sea, Truck Transport, Courier Express etc.
|
Generally speaking, there are two ways to make large stainless steel balls. See one of them below:
Step 1: Preparation
To make a stainless steel ball, we will first cut pieces of stainless steel sheet.
Step 2: Production
After the previous procedure, what we have isn’t technically a round hollow ball but an angular ball-like product. For smaller-size hollow stainless steel balls, they are flat stainless steel sheet and then shaped and punched into a half-sphere mechanically. For large stainless steel balls for more than 400mm, they are shaped by special machine which pumps gallons of water inside through a open hole on the ball, slowly turning it round due to water pressure. However, a ball will not be flat on the surface but will become afterwards. While pumping, a ball will be placed on a large pool of sand. A ball will be pumped and rolled on the sand and become flat on the surface eventually.
Step 3: Polishing.
After we finish pressure, we will get an almost-round and flat stainless steel sphere. Afterwards, it will be polished for several times and cleaned by using polishing machine and polishing wax, but most importantly efforts from professional workers.